General Information - KYMCO DINK 200 Manual

1

. GENERAL INFORMATION

CLUTCH, DRIVE AND DRIVEN PULLEYS
Engine starts but
motor-cycle does not
move
Motorcycle creeps or
engine starts but soon
stops or seems to rush
out (Rear wheel
rotates when engine
idles)
Engine lacks power at
start of a grade(poor
slope performance)
Engine lacks power at
high speed
There is abnormal
noise
or smell while running
1-25
Symptom
Probable Cause
Worn or slipping drive belt
Broken ramp plate
Broken drive face spring
Separated clutch lining
Damaged driven pulley shaft splines
Damaged final gear
Seized final gear
Broken shoe spring
Clutch outer and clutch weight stuck
Seized pivot
Worn or slipping drive belt
Worn weight rollers
Seized drive pulley bearings
Weak driven face spring
Worn or seized driven pulley bearings
Worn or slipping drive belt
Worn weight rollers
Worn or seized driven pulley bearings
Oil or grease fouled drive belt
Worn drive belt
Weak driven face spring
Worn or seized driven pulley bearings
DINK 200