Drive And Driven Pulleys/ Kick Starter; Left Crankcase Cover - KYMCO DINK 200 Manual

8
. DRIVE AND DRIVEN PULLEYS/
KICK STARTER

LEFT CRANKCASE COVER

REMOVAL
Remove two bolts on the air cleaner.
Remove the air cleaner.
Remove the left crankcase cover bolts and left
crankcase cover.
Remove the seal rubber and dowel pins.
INSTALLATION
Install the dowel pins and the seal rubber.
Install the left crankcase cover.
• Do not pull out the kick starter spindle.
Press in the kick starter spindle when
installing the left crankcase cover.
Install the cable clamp to the specified
location. Install and tighten the left crankcase
cover bolts.
8-3
Air Cleaner
Bolts
Bolts
Left Crankcase Cover
Kick Lever
Dowel Pins
Left Crankcase Cover
Bolts
DINK 200