Fuel Pump Removal/Disassembly; Fuel Pump Installation - KYMCO DINK 200 Manual

13
. FUEL SYSTEM/CARBURETOR/FUEL PUMP
FUEL PUMP REMOVAL
Remove the frame center cover.
Disconnect the fuel pump inlet, outlet and
vacuum tubes.
Remove the fuel pump attaching two bolts
and the fuel pump.

FUEL PUMP INSTALLATION

Install the fuel pump and secure it with the
two bolts.
Connect the fuel pump inlet, outlet and
vacuum tubes.
Install the seat, met-in box and frame center
cover.
Measure the fuel pump output.
Start the engine and disconnect the fuel
outlet tube and place a clean container under
the tube to check the fuel output.
Output: 40cc/1500rpm/10 seconds .
13-17
Outlet Tube
Vacuum Tube
Outlet Tube
Fuel Pump
Outlet Tube
Fuel Pump
DINK 200
Inlet Tube
Fuel Strainer
Container