11
. CRANKCASE/CRANKSHAFT
Place the left crankcase down and install the
crankshaft into the left crankcase.
Avoid damaging the oil seal.
•
Apply grease to the lip of the oil
•
seal.
Install the two dowel pins and a new gasket.
Place the right crankcase over the crankshaft
and onto the left crankcase.
Install the right crankcase
•
squarely and do not tap it with an iron
or plastic hammer.
Install and tighten the right and left crankcase
attaching bolts.
Torque: 7.8
10.8N-m
Dowel Pins
Gasket
Left Crankcase
Right Crankcase
Bolts
DINK 200
11-6