Drive Pulley - KYMCO DINK 200 Manual

8
. DRIVE AND DRIVEN PULLEYS/
KICK STARTER
DINK 200
Install the air cleaner and tighten the bolts.
Bolts
Drive Pulley Face

DRIVE PULLEY

REMOVAL
Remove the left crankcase cover.
Hold the drive pulley using an universal
holder and remove the drive face nut.
Remove the drive pulley face.
Special
Universal Holder
Universal Holder
Movable Drive Face
Remove the drive belt from the movable drive
face.
Drive Belt
INSPECTION
Check the drive belt for cracks, separation or
abnormal or excessive wear.
Measure the drive belt width.
Service Limit: 17.5mm replace if below
Use specified genuine parts for
•
replace-ment.
8-4