Brother ADS-2100e User Manual page 81

Scan Using Your Computer
Setting Description
Contrast Adjust the setting (-50 to 50) to get the best image. The
default value of 0 represents an average and is usually
suitable for most images. You can increase or decrease
the contrast level by moving the slider to the right or left.
An increase emphasizes dark and light areas of the
image, while a decrease reveals more details in grey
areas. You can also enter a value in the box to set the
Contrast.
NOTE
The Contrast setting is only available when setting
Scan Type to Auto, Grey (Error Diffusion),
True Grey or 24bit Colour.
Continuous Lets you scan multiple pages. After the page is
Scanning scanned, you can select to continue scanning or finish.
Using this method, you can scan more pages than the
maximum capacity of the document feeder.
2-sided If you check this box, the machine scans both sides of
Scanning the document. When using the automatic 2-sided
(duplex) scan feature, you must select
Long-edge binding or Short-edge binding depending
on the layout of your original to make sure that the data
file created appears correctly in the scanned document.
NOTE
The 2-sided (duplex) scanning feature is available
with lengths up to Legal size.
Applicable Feature
Image OCR E-mail File
Yes Yes Yes
Yes Yes Yes
Yes Yes Yes
Print
Yes Yes
5
Yes Yes
Yes Yes
70