Brother ADS-2100e User Manual page 105

Scan Using Your Computer
You can configure more settings in the Advanced Settings dialog box. Click the Advanced Settings button.
Setting Description
Brightness Adjust the setting (0 to 100) to get the best image. The
default value of 50 represents an average and is usually
suitable for most images. You can set the Brightness
level by dragging the slider to the right or left to lighten or
darken the image. If the scanned image is too light, set a
lower Brightness level and scan the document again. If the
image is too dark, set a higher Brightness level and scan
the document again.
Contrast Adjust the setting (0 to 100) to get the best image. The
default value of 50 represents an average and is usually
suitable for most images. You can increase or decrease
the contrast level by moving the slider to the right or left.
An increase emphasizes dark and light areas of the
image, while a decrease reveals more details in grey
areas.
NOTE
The Contrast setting is only available when setting
Scan Type to Auto, Grey (Error Diffusion),
True Grey or 24bit Colour.
Colour Drop Remove a specific colour from your scanned images.
Select one of the following colour to remove:
 Chromatic colours
Use to remove all other colours except Black.
 Red
Use to remove the Red colour.
Green

Use to remove the Green colour.
 Blue
Use to remove the Blue colour.
 Custom
The Custom dialog box will open. You can select the
colour that you want to remove.
Applicable Feature
Image OCR E-mail
Yes Yes Yes
Yes Yes Yes
Yes Yes Yes
File
Yes
5
Yes
Yes
94