Brother ADS-2100e User Manual page 170

Scan Using the Control Panel
5
Click the Advanced Settings button. The Advanced Settings dialog box will appear.
6
Change the settings.
The following settings can be changed:
Setting Description
Brightness Adjust the setting (0 to 100) to get the best image. The
default value of 50 represents an average and is usually
suitable for most images. You can set the Brightness
level by dragging the slider to the right or left to lighten or
darken the image. If the scanned image is too light, set a
lower Brightness level and scan the document again. If the
image is too dark, set a higher Brightness level and scan
the document again.
Contrast Adjust the setting (0 to 100) to get the best image. The
default value of 50 represents an average and is usually
suitable for most images. You can increase or decrease
the contrast level by moving the slider to the right or left.
An increase emphasises dark and light areas of the
image, while a decrease reveals more details in grey
areas.
NOTE
The Contrast setting is only available when setting
Scan Type to Auto, Grey (Error Diffusion),
True Grey or 24bit Colour.
Applicable Feature
Image OCR E-mail
Yes Yes Yes
Yes Yes Yes
6
File
Yes
Yes
159