Appendix
LEDs
Machine Status
File Name Cannot Be Used
The maximum sequential number for the file name has been reached. Press any key and
then do one of the following:
Delete unused files from the USB flash drive and then try again.
Change the file name by doing one of the following:
• See Change Scan Settings (ControlCenter4) (Windows
• See Change Scan Settings (ControlCenter2) (Macintosh) on page 89.
• See Change Scan to PC Settings (Windows
• See Change Scan to PC Settings (Macintosh) on page 154.
• See Save Scanned Documents on a USB Flash Drive on page 123.
All Blank Page Skipped
All scanned pages were skipped as blank pages. Press any key and then and then do one
of the following:
Place your document, face down, top edge first in the document feeder.
Set Blank Page Skip to Off by doing one of the following:
• See Change Scan Settings (ControlCenter4) (Windows
• See Change Scan Settings (ControlCenter2) (Macintosh) on page 89.
• See Change Scan to PC Settings (Windows
• See Change Scan to PC Settings (Macintosh) on page 154.
®
) on page 66.
®
) on page 147.
®
) on page 66.
®
) on page 147.
B
222