Brother ADS-2100e User Manual page 33

General Information
2
Type "http://machine's IP address/" into your browser (where "machine's IP address" is the
machine's IP address).
 For example:
http://192.168.1.2/
NOTE
• If you are using a Domain Name System or enable a NetBIOS name, you can enter another name such
as "SharedScanner" instead of the IP address.
• For example:
http://SharedScanner/
If you enable a NetBIOS name, you can also use the node name.
• For example:
http://brwxxxxxxxxxxxx/
You can find the NetBIOS name from the control panel as Node Name.
• For Macintosh users, access the Web Based Management System by clicking the machine icon on the
Status Monitor screen. For more information, see Monitor the Status of the Machine from Your Computer
(Macintosh) on page 165.
2
When the Web Based management screen appears, click the Administrator tab.
Click User Restriction Function.
3
Do one of the following:
 Click Secure Function Lock, then click Submit. Go to 4.
 Click Active Directory Authentication, then click Submit. Go to 5.
4
Click Secure Function Lock in the left navigation bar on the Web Based Management to configure the
settings.
See Configure Secure Function Lock on the Network User's Guide for more information.
Once you set Secure Function Lock, the Public Mode icon appears on the LCD.
Push the Public ID icon to change the user you set in the Web Based Management.
NOTE
If you don't touch the LCD in one minute, it will automatically return to Public Mode.
1
22