Brother ADS-2100e User Manual page 168

Scan Using the Control Panel
Setting Description
Document Size Document size is set to Auto by default. You can scan
documents of any size without making any adjustments to
Document Size. For faster scan speeds, you can select
the exact size of your document from the Document Size
drop-down list.
NOTE
• If you select a 1 to 2 document size, the scanned
image will be divided into two documents that are half
the size of the setting. For example, if you select
1 to 2 (A4), the scanned image will be divided into two
A5-size documents.
• To do 1 to 2 scanning, clear the Auto Image Rotation
check box in the Advanced Settings dialog box.
• If you select a 2 in 1 document size, two scanned
images will be combined into one document.
• You can select Long Paper when you configure the
settings as the following:
Restore Defaults Restore all settings to their factory default values.
Carrier Sheet You can scan the following documents using the Carrier
Mode Sheet. For this mode, you can select any setting other
than Auto from the Document Size drop-down list.
 Large-sized Documents (A3, B4 and Ledger)
Fold the document in half and insert it in the Carrier
Sheet for 2-sided (duplex) scanning, then both front
and back pages will be combined into a single page.
Select 2 in 1 (A4) for an A3 document, 2 in 1 (B5) for
a B4 document or 2 in 1 (Letter) for a Ledger
document from the Document Size drop-down list.
 Important documents (photos, contracts)
 Thin paper (receipts)
 Irregular-shaped paper (clippings)
NOTE
• Load only one Carrier Sheet at a time.
• Set the document in the centre of the Carrier Sheet and
align the top of the document with the top of the Carrier
Sheet.
• Auto Deskew: Off
• 2-sided Scanning: Off
Applicable Feature
Image OCR E-mail
Yes Yes Yes
Yes Yes Yes
Yes Yes Yes
File
Yes
6
Yes
Yes
157