Enter An E-Mail Address Manually - Brother ADS-2100e User Manual

Scan Using the Control Panel
4
Press . The software keyboard will appear on the LCD.
NOTE
• The LDAP protocol supports you to search for E-mail addresses on your server. For information on how
to configure the LDAP protocol, see Changing LDAP Configuration in the Network User's Guide.
• The LDAP search result will be shown on the LCD with
5
Enter the initial characters for your search and then press OK. The machine starts searching the Address
Book, and then the search result will be shown.
6
Swipe left or right, or press a or b until you find the name you are looking for.
7
Press the name from the result.
8
Press Apply.
NOTE
• If you want to register an E-mail address in the Address Book, see Set Up the Address Book
(ADS-2600We only) on page 142.
• You can select up to 300 E-mail addresses from the Address Book and enter up to 50 E-mail addresses
manually. The scanned data will be sent to all of the addresses at the same time.

Enter an E-mail Address Manually

1
Swipe left or right, or press d or c to display Scan 2.
2
Press to E-mail Server.
3
Press Manual. The software keyboard will appear on the LCD.
4
Enter an E-mail address and then press OK.
5
Press OK.
NOTE
You can enter up to 50 E-mail addresses manually. The scanned data will be sent to all of the addresses
at the same time.
before the local address book search result.
6
6
141