NOTE
• If you make a mistake when entering a character, press [ ] or [ ] to position the
cursor on the right side of the incorrect character ➞ press [Backspace] to delete the
character ➞ enter the correct character.
• To delete all of the entered characters, press
• The available entry modes and the maximum number of characters that you can enter
may vary depending on the type of entries you are making.
3
Entering Characters Using a USB Keyboard
Instead of using the on-screen keyboard, you can also use a standard USB
keyboard to enter characters.
IMPORTANT
• Make sure that the shape of the USB keyboard connector meets USB specifications.
Inserting a connector that does not meet USB specifications may damage the USB
port.
• Do not insert the connector of the USB keyboard into the USB port at an angle.
• Some USB keyboards may not operate correctly.
NOTE
The USB keyboard can be disconnected from the machine at any time. No special
operation is required to remove it.
❑
Press the key for the desired symbol.
(Clear) on the control panel.
When you have entered all
characters, press [OK].
Using the Touch Panel Display
2
2-7