Canon ImageRunner 2545i Reference Manual page 48

3
When copying on the back
side of a preprinted sheet
NOTE
• Follow the instructions on the paper package about which side of paper to print on.
• If paper becomes jammed, try turning the paper stack over and reloading it.
Loading Limit Mark
Feeding
Direction
Feeding
Direction
Load the paper into the stack
bypass.
When the paper is loaded in the stack
bypass, the side facing down is the one
printed on.
Make sure that the height of the paper
stack does not exceed the loading limit
mark ( ).
Straighten out curled paper prior to use.
Curled paper may cause a paper jam.
If you find it difficult to straighten out curled
paper, curl the front edges of the paper
upward.
To print on the back side of preprinted
paper, load the preprinted side face up in
the stack bypass.
IMPORTANT
• When loading paper in the stack
bypass, align the paper stack neatly
between the slide guides.
• If you are loading heavyweight paper
or envelopes, curl the feeding edge
upward approximately 3 mm. Curling
the feeding edge enables the rollers
to grip the paper or envelopes as
they are fed into the stack bypass.
Loading Paper in the Stack Bypass
2
2-23