3
● If you want to select an envelope type:
3-20
Specifying Common Settings
❑
Select the desired paper type ➞ press
[OK].
The selected mode is set.
IMPORTANT
Make sure that the paper type setting
is correct. An incorrect paper type
setting may adversely affect the image
quality, damage the fixing unit, and
cause paper jams.
NOTE
[3-hole punch] and [Transparency]
cannot be selected for a nonstandard
paper size.
❑
Press [Envelope].
❑
Select the desired envelope type ➞
press [OK].
IMPORTANT
Make sure that the envelope type
setting is correct. If the envelopes
loaded on the stack bypass and the
envelope type setting do not match, a
paper jam may occur.