Selecting The Desired Function; Using The Menus - Canon ImageRunner 2545i Reference Manual

Selecting the Desired Function

By default, the machine is set to display the top screen of the Copy function when
you turn ON the machine. (See "Initial Function at Power ON," on p. 3-2.) If you
wish to use other functions, such as Send and Remote Scan, you need to switch
the display to the screen of the desired function.
The table below lists the keys that you need to press to select the desired function.
Functions
Copy
Send or Fax
Remote Scan, USB
Memory Media Print,
or Secure Printing
System Monitor
IMPORTANT
• To use the Send function with the imageRUNNER 2545/2535/2530/2525/2520, the
function must be activated with the optional Color Send Kit-Y1.
• The Fax function is available only when the optional Super G3 Fax Board-AG1 is
attached to the machine.

Using the Menus

The machine employs a menu system that you can use to configure the machine
settings or register important information.
Not highlighted
(Not selected)
Key
(COPY)
(SEND)
(SCAN/PRINT)
[System Monitor]
Keys with a right triangle ( ) in the lower right
corner indicate that pressing these keys
displays additional screens or drop-down lists
to set their functions.
Highlighted keys indicate that the
corresponding settings or modes are
selected. To select the other settings or
Highlighted
modes, press the keys that are not
(Selected)
highlighted. Some highlighted keys can be
pressed to cancel the selected settings or
modes.
Location
Control Panel
Touch Panel Display
Using the Touch Panel Display
2
2-3