Additional Functions Settings Table
The tables below list the settings that can be selected from the Additional Functions
menu. Some functions can be used only when the appropriate optional equipment
is attached. For more information on the settings that are not listed in this section,
see the following manuals:
• Copy Settings:
• Communications Settings:
• Printer Settings:
• Report Settings:
• Address Book Settings:
• System Settings:
■ Common Settings
Additional Functions
7
Initial Function
Auto Clear Setting
Toner Save Mode
Printer Density
Inch Entry
The default settings are indicated in bold.
7-2
Additional Functions Settings Table
See the Copying Guide.
See the Sending and Facsimile Guide.
See the Printer Guide.
See the Sending and Facsimile Guide.
See the Sending and Facsimile Guide.
See the System Settings Guide.
Settings
Select Initial Function:
Copy, Send, Scan/Print
Set System Monitor Screen as Initial
Function:
On, Off
Set [Device] as Default for System Monitor
Screen:
On, Off
Initial Function, Selected Function
High, Low, Off
-4 to +4; ±0
On, Off
Applicable
Page
p. 3-2
p. 3-4
p. 3-5
p. 3-6
p. 3-7