35. The installation will proceed to copy all necessary files and prompt for a Restart. Select "Restart Now"
and Click "Finish". If you selected "Restart Later" make sure to RESTART THE COMPUTER
before you attempt to use the driver, the installation will not be complete until restarting the
system.
36. If you have not done so yet, connect the DSL-302G USB Modem to the computer now using the proper
USB Device cable. Connect the DSL line to the USB Modem as well.
37. Open the Control Panel: TCP/IP Windows.
38. A window should pop up indicating the TCP/IP settings.
39. From the "Connect via:" pull down menu, select the new port (i.e.: "Ethernet slot 0").
40. From the "Configure:" pull down menu, select the "Using DHCP Server".
DSL-302G ADSL Modem User's Guide
13