D-Link DSL-302G User Manual page 59

The EoA Configuration table displays the following fields:
EoA Interface
Interface Sec Type
Lower Interface
Conf. IP Address
Netmask
Use DHCP
Default Route
Gateway IP Address
To define EOA settings for a new virtual connection, click the Add button. To modify an existing EOA setting,
click the pencil icon (
appears (see below). To delete an existing AAL5 setting, click the trashcan ( ) for that set.
DSL-302G ADSL Modem User's Guide
EOA Configuration
The EoA interface you are configuring.
The type of Firewall protections that are in effect on the interface.
A public interface connects to the Internet (PPP interfaces are typically
public). Packets received on a public interface are subject to the most
restrictive set of firewall protections defined in the software.
A private interface connects to your LAN, such as the Ethernet interface.
Packets received on a private interface are subject to a less restrictive set
of protections, because they originate within the network.
The term DMZ (de-militarized zone), in Internet networking terms, refers to
computers that are available for both public and in-network accesses
(such as a company's public Web server).
The name of the lower-level interfaces on which EoA interface will operate.
The low-level interface names are pre-configured in the software and
identify the type of traffic that can be supported, such as data or voice.
Internet data services typically use an AAL5-type interface.
If you are adding a new VCC Interface, choose the AAL5 set you want to
define from the pull-down menu (Add menu only).
The IP address you want to assign to the interface.
The netmask you want to assign to the interface.
When set to Enable, the device will acquire additional IP information from
the ISP's DHCP server. The PPP connection itself acquires the device's IP
address, mask, DNS address, and default gateway address.
Indicates whether the Modem should use the IP address assigned to this
connection as its default route.
The external IP address that the Modem communicates with via the EoA
interface to gain access to the Internet. This is typically an ISP server.
) for that set. When you choose to add a new set or modify an existing set, a new menu
41