Installation Requirements - D-Link DSL-302G User Manual

Installation Requirements

Information you will need from your ADSL service provider:
Username
Password
Connection Protocol
Security Protocol
VPI
VCI
Information you will need about your DSL-302G ADSL modem:
Modem Username
Modem Password
LAN IP address for the
DSL-302G
LAN Subnet Mask for
the DSL-302G
DSL-302G ADSL Modem User's Guide
This is the Username that is used to log on to your
ADSL service provider's network. It is commonly in
the form − user@isp.com.
This is the Password that is used, in conjunction with
the Username above, to log on to your ADSL service
provider's network.
This is the method that your ADSL service provider
uses to send and receive data between the Internet
and your computer. Your DSL-302G supports PPPoE
LLC, PPPoE VC-Mux, PPPoA LLC, and PPPoA VC-
Mux, Bridged Ethernet and IPoA.
This is the method your ADSL service provider will
use to verify your Username and Password when you
log on to the remote network.
supports the PAP and CHAP protocols.
This is the Virtual Path Identifier (VPI). It is used in
conjunction with the Virtual Channel Identifier (VCI)
below, to identify the data path between your ADSL
service provider's network and your computer.
This is the Virtual Channel Identifier (VCI). It is used
in conjunction with the VPI above to identify the data
path between your ADSL service provider's network
and your computer.
This is the Username you will be prompted to enter
when you access the DSL-302G's configuration
screens using a Web browser. The default Username
is admin.
This is the Password you will be prompted to enter
when you access the DSL-302G's configuration
screens using a Web browser. The default Password
is admin.
This is the IP address you will enter into the Address
field of your Web browser to access the DSL-302G's
configuration screens using a Web Browser.
default for the Ethernet interface is 10.1.1.1 and for
the USB interface it is 10.1.1.2.
This is the subnet mask used by the DSL-302G, and
will be used throughout your LAN. The default subnet
mask is 255.0.0.0.
Your DSL-302G
8
Record your info
here.
Record your info
here.
The