D-Link DSL-302G User Manual page 91

4. Select "Restart Now" and click "Finish". If you select "Restart later" please remember to do it later, the
Uninstallation will not be complete until then.
Removal of previously created Network Interfaces
1. Unplug the USB cable from the USB Modem.
2. Open the System Preferences and select the Network Preference Pane.
3. From the "Show" pull down menu select "Active Network Ports". Highlight the interface you created
during driver configuration (i.e., "Ethernet Adaptor en1") . Click "Delete" and confirm deletion in the
following pop up dialogue.
4. OSX may not allow you to completely remove the interface. If that's the case (the checkbox was
removed from the Network interface but the interface itself was not deleted) you may need to Restart
the system and then repeat steps 2-3 in order to completely get rid of it.
5. Close the System preferences Application completely by pressing Option-Q ("Apple" key and the 'Q'
key simultaneously)
DSL-302G ADSL Modem User's Guide
8