Save & Reboot - D-Link DSL-302G User Manual

User ID: This lists the current User ID (user name).
Old Password: Type in the password used with the current User ID.
New Password: Type in the new password.
Confirm New: Type in the new password a second time for confirmation.
Click Submit to save the settings in temporary memory. When you are done making changes to the
configuration settings, open the Save & Reboot menu and click Save to save your changes to permanent
memory.
Save & Reboot
Whenever you use the Web Configuration Manager to change system settings, the changes are initially placed in
temporary storage (called random access memory or RAM). Your changes are made effective when you submit
them, but will be lost if the device is reset or turned off.
To save your changes for future use, you can use the commit function. This function saves your changes from
RAM to permanent storage (called flash memory).
Note
Use the Save & Reboot menu to commit changes to permanent storage.
After you have submitted all the configuration changes you want to make for this session, click on the Save &
Reboot button in the Admin folder to view the Commit & Reboot page.
To save current configuration settings as they have been submitted click Save.
(Disregard the selection in the Reboot Mode drop-down list; it does not affect the commit process.)
The changes are now saved to permanent storage (flash memory), and the previous settings are copied to backup
storage so that they can be recalled if your new settings do not work properly (see the rebooting instructions
below).
Reboot the Modem
To reboot the device using the Configuration Manger, display the Commit & Reboot page, select the appropriate
reboot mode from the drop-down menu, and then click Reboot.
Do not reboot the device using the Reset button on the back panel of the Modem to
activate new changes. This button resets the device settings to the manufacturer's
default values. Any custom settings will be lost.
IMPORTANT
DSL-302G ADSL Modem User's Guide
When you Submit changes, they are activated immediately, but they are only
saved until the device is reset or turned off. You must Commit the changes to
saves them permanently.
Save and Reboot
52