D-Link DSL-302G User Manual page 41

DSL-302G ADSL Modem User's Guide
Click the Disable click-box, and then click the Submit button to make the change current.
Now open the Bridging folder and click on the Bridging link. This will open the Bridge Configuration menu,
as shown below.
Select eoa-0 from the drop-down menu opposite the Add button. Next, click on the Add button. A
confirmation screen will appear briefly to confirm the addition of the new bridge configuration.
Finally, you will need to open the Admin folder and then click on the Save & Reboot link to open the Save &
Reboot menu, and finally click the Save button to enter the settings into the modem's permanent memory.
Now you can setup your computer to use the IP address assigned to you by your ADSL service provider. Your
ADSL service provider should give you the necessary software and instructions to setup your computer.
23