Part Names and Functions
Front/Top
Name
A
Exhaust vent for air used to cool the projector internally.
Air exhaust vent
B
Adjusts the image focus. s
Focus ring
C
Adjusts the image size. s
Zoom ring
Function
Caution
While projecting, do not put your face or hands
near the air exhaust vent, and do not place objects
that may become warped or damaged by heat near
the vent. Hot air from the air exhaust vent could
cause burns, warping, or accidents to occur.
p.23
p.23
Name
D
Lens unit removal
When replacing the lens unit, press this button and then
button
remove the lens unit.
E
Receives signals from the remote control.
Remote receiver
F
The color of the indicators and whether they are flashing
Status indicators
or lit indicate the status of the projector. s
G
Takes in air to cool the projector internally.
Air intake vent
(air filter)
H
Air filter cover
Use this knob to open the air filter cover.
operation knob
I
Cover for the rear interface cable connection section.
Cable cover
p.42
s
J
Vertical lens shift dial
Turn the dial to move the position of the projected image
up or down. s
K
Locks or releases the lens shift dials.
Lens shift dial lock
L
Turn the dial to move the position of the projected image
Horizontal lens shift
left or right. s
dial
M
Open when replacing the projector's lamp.
Lamp cover
Function
p.16
p.22
p.22
6