Table of Contents
Advertisement
Removing and Attaching the Projector Lens Unit
Removing
Attention
• Only remove the lens unit when necessary. If dust or dirt enter the projector,
projection quality deteriorates and it could cause a malfunction.
• Try not to touch the lens section with your hand or fingers. If fingerprints or
oils are left on the surface of the lens, projection quality deteriorates.
• If the lens shift has been done, set the lens shift to the center before replacing
the lens unit.
s "Adjusting the Position of the Projected Image (Lens Shift)"
a
When the lens unit removal button is fixed with a screw, remove
the screw.
b
While pressing the lens unit removal button, turn the lens unit
counterclockwise until you hear it click.
p.22
c
Pull the lens unit straight out as it is released.
14
Advertisement
Table of Contents
