Rear; Interface - Epson EB-G6800 Installation Manual

Part Names and Functions

Rear

Name
A
s "Interface"

Interface

B
The security slot is compatible with the Microsaver
Security slot
Security System manufactured by Kensington.
p.76
s
C
Power inlet Connects to the power cable.
D
Control panel s "Control Panel"
E
Insert the supplied cable clamp here to prevent the cable
Cable holder
from falling out.
Function
p.7
p.9
Interface
Name
A
Audio1 port Inputs audio from equipment connected to the Computer
port.
B
For analog RGB signals from a computer and component
Computer port
video signals from other video sources.
C
For analog RGB signals from a computer and component
BNC port
video signals from other video sources.
D
Audio2 port Inputs audio from equipment connected to the BNC port.
E
RS-232C port When controlling the projector from a computer, connect
it to the computer with an RS-232C cable. This port is for
control use and should not normally be used.
F
Connects the optional remote control cable set and inputs
Remote port
signals from the remote control. When the remote control
cable is plugged into the Remote port, the remote receiver
on the projector is disabled.
G
Audio-L/R port Inputs audio from equipment connected to the Video port
or the S-Video port.
H
Inputs composite video signals from video sources.
Video port
I
For S-video signals from video sources.
S-Video port
7
Function