Table of Contents
Advertisement
Setting Up
b
While holding the [ID] button, press a number button to select a
number to match the ID of the projector you want to operate.
"Checking the Projector ID"
s
Remote control
Once this setting has been made, the projector that can be operated by the
remote control is limited.
a
The remote control ID setting is saved in the remote control. Even if
the remote control batteries are removed to replace them and so on,
the stored ID setting is retained. However, if the batteries are left out
for a long time, it is reset to the default value (ID0).
p.28
Setting the Time
You can set the time for the projector. The set time is used for the schedule
function.
Press [Menu] button > Extended > Operation > Date & Time
a
• When you turn on the projector for the first time, the message "Do
you want to set the time?" is displayed. When you select Yes, the
following screen displayed.
• When Time/Schedule Protection is set to On in Password
Protection, settings related to the date and time cannot be changed.
You can make changes after setting Time/Schedule Protection to
Off. s
p.73
Date & Time
Submenu
Date
Time
Time Difference (UTC)
Set
Function
Set today's date.
Set the current time.
Set the time difference from Coordinated
Universal Time.
The settings made in Date & Time are applied.
29
Advertisement
Table of Contents
