Table of Contents
Advertisement
Projecting Images
The top and left edges of the projected image overlap, so select Top
Edge and Left Edge, and then set Blending to On.
A guide display indicates the area to which blending will be applied.
In Blend Range, adjust the range to be shaded. Adjustment is
possible at the level of one pixel. The range to which gradation can
be applied is up to 45% of the projector's panel resolution
(maximum area in which an image can be displayed).
The value for when the overlapped range and the guide are in the
same position is the best.
a
• You can select the color of the guide from Guide Colors.
• Check the range to which gradation can be applied as this
changes depending on the connected equipment.
c
When you have finished making adjustments, set Guide Display
and Pattern Guide to Off.
Black Level
When a black image is displayed, only areas where the images overlap
stands out. The black level function allows you to match the brightness and
tone for areas where the images do not overlap with areas where the images
overlap, to make the difference less noticeable.
65
Advertisement
Table of Contents
