Table of Contents
Advertisement
Connecting Equipment
Attention
• If the input source is on when you connect it to the projector, it could cause a malfunction.
• If the orientation or shape of the plug differs, do not try to force it in. The device could be damaged or could malfunction.
a
• Change the audio output from Audio Settings.
Press [Menu] button > Extended > A/V Settings > Audio Settings
• If audio is not sent using an HDMI cable, connect a commercially available audio cable to the Audio3 port to send the audio. Set HDMI Audio Output to
Audio3.
Press [Menu] button > Extended > A/V Settings > Audio Settings > HDMI Audio Output
• If the source you want to connect to has an unusually shaped port, use the cable supplied with the device or an optional cable to connect to the projector.
• When using a commercially available 2RCA(L/R)/stereo mini-pin audio cable, make sure it is labeled "No resistance".
38
Advertisement
Table of Contents
