Table of Contents
Advertisement
Projecting Images
(2) Brightness Adjustment.
Adjust the Brightness Level so that the brightness of the lamp for each
projector matches.
Press [Menu] button > Extended > Multi-Projection > Brightness Level
Adjust so that all projectors are the same brightness as the darkest lamp.
You can adjust the brightness in five levels.
a
• Set Power Consumption to Normal.
Press [Menu] button > Settings > Power Consumption
• Even if you adjust the Brightness Level, the brightness of each lamp
may not match exactly.
(3) Edge Blending
Fine tune overlapping areas to make seamless screen.
Perform this in Edge Blending from the Configuration menu.
Press [Menu] button > Extended > Multi-Projection > Edge Blending
The following screen is displayed.
Operations
a
From the screen above, set Edge Blending, Guide Display, and
Pattern Guide to On.
b
Set Top Edge, Bottom Edge, Left Edge or Right Edge according
to the parts of the image that overlap.
Example: When setting the screen in (1)
64
(1)
Advertisement
Table of Contents
