6.5
DOOR INSTALLATION
Place brass washers onto the faceplate hinge
bushing (2 extra washers are supplied in order to
level the doors if needed).
Slide the door hinge pin into the faceplate hinge
bushing.
To remove the doors, open them slightly and lift
them out of the faceplate hinge bushings.
6.6
DOOR HANDLE INSTALLATION
The door latch is adjusted by moving the washer from one side of the latch to the other. Tighten the outer nut to
secure the latch.
CROSS-SECTION OF
Door Latch Rod
Door Latch Rod
Inner Nut
1/2" (12.7mm)
Wrench
Threaded portion
of handle
DOOR & GLASS
Door
Frame
Glass
Glass
Gasket
27
Door
Handle
W415-1501 / 05.15.15
EN