6.0 FINISHING
USE ONLY A NON-COMBUSTIBLE MATERIAL TO FINISH THE FACE OF THE APPLIANCE.
A NON-COMBUSTIBLE MATERIAL SUCH AS CEMENT BOARD IS REQUIRED FOR THIS PURPOSE.
VENTILATION OPENINGS ARE REQUIRED IN ENCLOSURES UP TO 96" (2438mm) HIGH. THEY ARE
ABOVE 84" (2134mm) COMBUSTIBLE FINISHING MATERIALS MAY BE USED ON THE FRONT FACE.
6.1
FACEPLATE
A.
Remove the facing template held in place
with the 12 screws shown. Discard the
screws and template.
6.2
UPPER GRILL INSTALLATION
A.
Mount the keystone and upper grill to
the faceplate as shown, using the 4 nuts
supplied.
B.
Remove the backing and place logo onto the
bottom left corner of the faceplate.
C.
Remember to record your serial # in the
manual for future quick reference.
RECOMMENDED FOR ALL ENCLOSURES.
DO NOT INSULATE AROUND THE APPLIANCE.
25
Logo
Placement
W415-1501 / 05.15.15
EN