Assigning Function Keys - Siemens optiPoint 410 User Manual

Customizing the Telephone
Step by Step
88

Assigning Function Keys

The optiPoint 410/420 economy/economy plus/stan-
dard S V6.0 features a number of functions which you
can assign to function keys as required.
You will find an overview of the options from
page 197.
The optiPoint 410/420 economy/economy plus/stan-
dard S V6.0 is equipped with 12 function keys all of
which are user-programmable on two levels.
Five of these keys are preassigned on the first level.
These keys are listed and illustrated on
Even these five preassigned keys can be repro-
grammed.
The possibility of programming a key may be
blocked by your service personnel. In this case
you get the message "Locked by administrator" if
you try to assign a function to this key.
If possible, do not change the Cancel and Shift keys.
These enable you to cancel procedures and/or program
shifted keys.
The optiPoint 420 or
optiPoint self labeling key module provide an elec-
tronic self-labelling function for programming keys.
The programming procedure using the telephone menu
is described below with examples. However, you can
also program keys using the web interface
( page 176).
page 18.