Siemens optiPoint 410 User Manual page 156

Operating the Telephone with the optiPoint display module
Step by Step
156
View Line
Press the View Line Box (see
switches to Call Control as shown in the figure below:
Manager
Bill Smith
987654321
Incoming Call
If a call is coming in on the prime line, the display
switches immediately to Call Control without you hav-
ing to press the View Line Box beforehand.
You now have the following options:
• Answer the call
• Deflect the call
• Transfer the call
If a call comes in on the selected line in idle mode
(e.g. Store) with a ring or call waiting signal, Call Control
is displayed as illustrated above.
page 153); the display
Mon 07/03/05