Dialing From Contacts - Siemens optiPoint 410 User Manual

Operating the Telephone with the optiPoint display module
Step by Step
124

Dialing from Contacts

If you have stored contacts in the local "Contacts" phone
book, you can use them anytime you want to dial a
number.
Please refer to the operating instructions for the
optiPoint display module for information on how
to create entries in the phone book.
Calling Contacts
To call a party from "Contacts", press the Contacts dis-
play key either before or after you have seized the line
( page 122 and/or
To consult ( page 127) with a party from "Contacts"
you can also press the Contacts display key.
To transfer a call (
open the menu and select the option Contacts.
In all cases a display similar to the one shown below ap-
pears:
Contacts
Ralph Delgado
Jeanine Fox
Jill Hill
Phil Jones
Harry Grey
Jane Brown
Isabella Ashley
Bill Smith
Fred Bloggs
Dial View
Find and select the relevant party in the list and then
press the display key Dial. The phone number is used
for this procedure.
page 119).
page 116) to a party in "Contacts",