Light Switch - Sony SRW-9000 Operation Manual

VIDEO button: Displays the VIDEO Setup
menu. The menu allows you to perform
Camera menu operations (see page 123).
AUDIO button: Displays the AUDIO Setup
menu (see page 175). This menu allows you
to make settings related to audio.
SYSTEM button: Displays the SYSTEM Setup
menu (see page 177). This menu allows you
to make settings related to the entire system,
such as recording format, power, and test
signal output.
For details on VTR menus, see "VTR Menu List"
(page 172).
b Display
Displays VTR menus, audio levels, warnings,
operating status, time data, remaining tape time,
and remaining battery power.
For details, see "Display" (page 25).
You can rotate the display to display it vertically
(rotated 90 degrees to the left).
To change the display, press the HOME button
while holding the FUNC and BACK buttons
down.
To return the display to its original orientation,
press the HOME button again while holding the
FUNC and BACK buttons down.
c KEY INHI (inhibit) switch
When the KEY INHI item (see page 180) in the
SYSTEM Setup menu is set to ALL, setting this
switch to ON disables operation buttons, to
prevent misoperations due to accidental button
operations.
ON: All operation buttons are disabled.
OFF: During recording, only the STOP button
and PAUSE button are enabled. All buttons
are enabled when the unit is not in recording
mode.
When the KEY INHI item in the SYSTEM Setup
menu is set to MAP, the operation buttons follow
the settings of the LOCAL KEYMAP item.
d LIGHT switch
The backlight comes on when this is set to ON.
e ADJUST knob
Use to adjust audio levels, etc.
f SELECT/ENTER dial
When a menu is displayed, you can turn this dial
to move the cursor, and press it to select and
confirm settings.
g BACK button
When a menu is displayed, you can press this
button to back up one level in the menu structure.
h Control panel connection cable
Connect to the CTRL (VTR) connector.
i EJECT button and indicator
Pressing the button opens the cover of the cassette
insertion slot so that you can remove a cassette.
The indicator lights during removal.
j FUNC (function) button and indicator
When the tape transport control buttons are
pressed with this button held down, the functions
of the buttons change.
The indicator lights when the FUNC button is
turned on.
For details, see "qa Tape transport control buttons"
(page 21).
Pressing the HOME button with this button held
down switches the display at the bottom of the
HOME screen.
For details, see "Display" (page 25).
k Tape transport control buttons
Use these buttons for tape transport
operations.The functions of the buttons change
when they are pressed together with the FUNC
button.
Locations and Functions of Parts 21