Setting The Video Format In The Vtr Menu - Sony SRW-9000 Operation Manual

Setting the Video Format in the
VTR Menu
Use FORMAT or OTHERS in the SYSTEM
Setup menu to select the system signal format.
Notes
• The tape formats supported by this unit may differ
from those supported by other VTRs.
Before selecting the tape format, be sure to read
"About Recording/Playback Formats" (page 208).
• If a cassette is loaded in the unit, be sure to eject it
before starting the following procedure.
For details on menu operations, see "VTR Menu
Operations" (page 170).
To set with FORMAT
1
Press the menu selection button
"SYSTEM" on the control panel.
The SYSTEM Setup menu appears.
2
Turn the SELECT/ENTER dial to
move the cursor to FORMAT, and then
press the dial.
A submenu window appears.
78 Detailed Video Format Settings
3
Turn the SELECT/ENTER dial to
select LINE in the submenu window if
necessary.
A setting window appears.
Setting window
4
Turn and press the SELECT/ENTER
dial to select the desired value.
This returns you to the submenu window,
which is activated again.
5
Repeat steps 3 and 4 to set the FRAME,
SIGNAL, and 3G/DUAL (when the
optional HKSR-9001 is installed) items.
6
In the submenu window, select [SET].
7
Confirm the format, move the cursor to
"OK", and then press the SELECT/
ENTER dial.
A message appears to inform you that the
format has been selected, and you return to
the HOME screen.
Submenu window