Mounting The Lens - Sony SRW-9000 Operation Manual

You can use BATTERY (see page 184) of the
SYSTEM Setup menu to set the battery voltage
threshold values that trigger the END and Near
END warnings.
You can check the power voltage in the subdisplay, in
the viewfinder, and on an external monitor. For
details, see "Checking the Power Voltage and
Selecting the Fan Mode" (page 50) and "Viewing
Settings and Indications in the Viewfinder" (page
61)
For details on the warning tone, see "Warning
System" (page 198).
30

Mounting the Lens

Mounting the Lens
Use an optional lens that conforms to the B4 (
lens mount.
For details on handling the lens, refer to the
operation manual for the lens.
1
Push the lens mount lever up and
remove the lens mount cap from the
lens mount.
2
Align the center pin on the lens with the
notch in the lens mount, and insert the
lens into the mount.
Lens mount securing rubber
8
1 5
1 2
2
/ ")
3
Lens mount lever
Notch