Relation Between Playback And Recording Signals And Video Monitor Output Signals - Sony SRW-9000 Operation Manual

To set with OTHERS
1
Press the menu selection button
"SYSTEM" on the control panel.
The SYSTEM Setup menu appears.
2
Turn the SELECT/ENTER dial to
move the cursor to OTHERS, and then
press the dial.
A submenu window appears.
3
Turn the SELECT/ENTER dial and
select FORMAT LIST in the submenu
window if necessary.
Relation between Playback and Recording Signals and Video Monitor
Output Signals
During recording and playback of HDSDI signals, signals in the formats shown in the following table are
output to the video monitors connected to the HD SDI MON1 and HD SDI MON2 connectors.
The format list screen appears.
A bar appears for formats that cannot be
used. A yellow check mark appears for
formats that can be used, and the current
format flashes.
4
Move the cursor to the format you want
to use.
To move the cursor left and right
Turn the SELECT/ENTER dial.
To move the cursor up and down
Turn the SELECT/ENTER dial with the
FUNC button held down.
5
Press the SELECT/ENTER dial.
"CANCEL" and "OK" appear at the bottom
of the screen.
To change the "SELECT FPS" setting, move
the cursor and press the ENTER button while
holding the FUNC button down.
6
Move the cursor to "OK", and then
press the SELECT/ENTER dial.
A message appears to inform you that the
format has been selected, and you return to
the HOME screen.
Detailed Video Format Settings 79