Configuration / Management / Snmp - Paradyne BitStorm 2600 IP DSLAM Installation Manual

Paradyne bitstorm 2600 ip dslam network card

Hide thumbs Also See for BitStorm 2600 IP DSLAM:

Table of Contents

4. Configuration

Configuration / Management / SNMP

SNMP access to the unit is disabled by default. The read-only community string is

public, and the read-write string is private. Community strings, network

management system addresses, and trap manager addresses can be set using

the System/Management/SNMP screen.

Procedure

To set SNMP parameters:

4-10

1. Click on the Configuration menu tab, then click on SNMP. The

System/Management/SNMP screen appears.

2. Enter new SNMP parameters as desired. Click on Apply.

April 2005

2600-A2-GN20-50

Table of Contents