Unpacking The Hardware; Package Contents - Paradyne BitStorm 2600 IP DSLAM Installation Manual

1. Installation

Unpacking the Hardware

The BitStorm 2600 is shipped in a cardboard shipping container. Carefully remove
the unit from its shipping container and check for physical damage. If the unit
shows signs of shipping damage, notify your sales representative.

Package Contents

In addition to this installation guide, the BitStorm 2600 shipping carton should
contain:
If anything is missing, notify your sales representative.
Before installing the BitStorm 2600, read the
beginning of this document.
Be sure to register your warranty at www.paradyne.com/warranty.
1-4
HANDLING PRECAUTIONS FOR
!
STATIC-SENSITIVE DEVICES
This product is designed to protect sensitive components from damage
due to electrostatic discharge (ESD) during normal operation. When
performing installation procedures, however, take proper static control
precautions to prevent damage to equipment. If you are not sure of the
proper static control precautions, contact your nearest sales or service
representative.
BitStorm 2600 DSLAM
AC Power Cable
Two sets of mounting brackets: one set suitable for a 19-inch (483 mm) rack
and one set suitable for a 23-inch (584 mm) rack (including Bay Networks and
Nortel)
Hardware kit (see Table 1-2, Contents of Hardware Kit Shipped with the
BitStorm 2600)
April 2005
Important Safety Instructions
2600-A2-GN20-50
in the