Toshiba MMU-AP0074YH-E Service Manual page 62

4
Push the TIME
DATA.
Change the value in SET DATA to that of a new address.
5
Push the button to confirm the new address on SET DATA.
6
Push the
Each time you push the button, the indoor unit numbers in a refrigerant line are indicated one
after another. Only the fan and louvers of the selected indoor unit are activated.
4 6
Repeat steps to
7
Push the button.
(All the segments on the LCD display light up.)
8
Push the button to finish the procedure.
/ buttons repeatedly to change the value of the indoor unit address in SET
button (left side of the button) repeatedly to select another address to change.
to change the indoor unit addresses so as to make each of them unique.
61