Toshiba MMU-AP0074YH-E Service Manual page 116

No. Part name
2 Electric parts 1. Detachment
cover
1) Perform work of procedure 1-1.
2) Take off screws (Ø4 × 10, 3 pcs.) fixing the electric parts
cover.
3) Remove the electric parts cover from the temporary hanging
hook of the electric parts cover, and then open the cover.
2. Attachment
1) Close the electric parts cover and hook the cover hole to the
temporary hanging hook.
2) Tighten the fixing screws. (Ø4 × 10, 3 pcs.)
3 Adjust corner 1. Detachment
cover
1) Perform work of procedure of 1-1.
2) Turn clockwise screws (4 positions) at the suction port
corner until adjust corner cover rises up.
NOTE
When you work, keep the torque at below 12N•m. Do not use an
electric screwdriver; otherwise the mechanism of adjust corner
cover may be damaged and not be removed.
3) Pull downward the risen-up part of adjust corner cover and
remove it.
4) Remove the strap of adjust corner cover.
2. Attachment
1) Attach the strap of adjust corner cover to the panel, hook
claws of adjust corner cover to the panel corner, and then
push the opposite side into the panel.
2) Turn screws (4 positions) of the suction port corner
counterclockwise until bump between adjust corner cover
and panel disappears.
NOTE
When you work, keep the torque at below 12N•m. Do not use an
electric screwdriver; otherwise the mechanism of adjust corner
cover may be damaged and not be removed.
Procedure
115
Remarks
Screw
Temporary hanging hook
Screw
Unnecessary to remove this hook.
Torque~12N•m
Torque~12N•m