Toshiba MMU-AP0074YH-E Service Manual page 109

No. Part name
5 Electrical 1. Detachment
control box
1) Perform work of procedure 1. of 2.
2) Take off the fixing screws. (Ø4 × 8, 4 pcs)
3) Remove the cord clamp on the ceiling surface, pull the
electrical control box downward, and then hook the hooking
claw at the rear side to square hole of the panel.
2. Attachment
1) Take off the hook at the rear side of the electrical control box.
2) Return the electrical control box at the original position, ant
then fit the fixing screws. (Ø4 × 8, 4 pcs)
3) Using cord clamp at the ceiling surface, fix the lead wires as
before.
Procedure
108
Remarks
Fixing screw
Square hole for hooking electrical control box
Fixing screw
Cord clamp
Hooking section