EEPROM location diagram
The EEPROM (IC10) is mounted on an IC socket. Use a pair of tweezers, etc. to remove it. When installing it, adjust
its orientation as shown in the diagram below.
During EEPROM removal / installation, take care not to bend IC leads.
P.C. board (MCC-1402)
EEPROM(IC10)
P.C. board (MCC-1403)
EEPROM(IC10)
103
When installing the EEPROM, align its
notch with that of the IC socket.
IC socket
Notch
EEPROM
Notch