Table of Contents
Advertisement
cLeANING and MAINteNANce
FIReBOx cLeANING
•
Allow logs to cool completely before cleaning. Logs reach high tem-
peratures.
•
Make sure clearances to combustibles leave enough room for main-
tenance and service.
•
carefully reassemble and reseal insert properly after any cleaning
or servicing.
1. Carefully remove log set, and embers from combustion chamber.
. Vacuum burner compartment thoroughly.
3. Vacuum any dust off logs.
4. Remove any lint from main burner and pilot.
5. Carefully replace log set, and embers in their correct positions. Refer to Pages 20 through
22.
6. Replace door.
7. Relight pilot. Refer to Page 25.
8. Turn on main burners.
83D4009
VLI31 Fireplace Insert
39
Advertisement
Table of Contents
