Navigation In Radar View - Humminbird ONIX Operating Manual

N R
AVIGATION IN ADAR
You can mark waypoints and start navigation from the Radar View. See Introduction to Navigation for more features and information.
NOTE: To display navigation data on the Radar View, see Change the Radar View Overlays: Display Navigation Data.
Mark a Waypoint
There are a variety of ways to mark a waypoint in the Radar View. The basic instructions are shown here. See Introduction to
Navigation for more features and information.
Mark a Waypoint at the Vessel Position
Touch Screen
1. Tap Radar in the status bar.
2. Select Mark.
3. Select Waypoint.
Mark a Waypoint at the Cursor Position
Touch Screen
1. Press and hold a position on the Radar View.
2. Select Waypoint.
V
IEW
Keypad
1. Press the MARK key twice.
Keypad
1. Use the Joystick to move the cursor to a position on
the chart.
2. Press the MARK key twice.
127 Radar & Navigation