Humminbird ONIX Operating Manual page 40

Change the Data Boxes
Use the following instructions to change the data boxes displayed in a data bar.
NOTE: A data bar must be displayed to access the menu options in this section. See Display a Data Bar.
1. View Options Menu: With a view displayed on-screen, press the PANE key once. In a multi-pane view, press the PANE key
repeatedly until the status bar turns yellow.
2. Press the MENU key.
3. Select Edit Data.
4. To edit the Standard data bar, select Standard Data. To edit the Navigation data bar, select Navigation Data.
Global (Optional): To apply the changes to all views using the data bar, turn on Global. To apply changes to the on-screen view
exclusively, turn off Global.
5. Use the Joystick to choose a data box. Press the Joystick to select it.
6. Select a data type from the menu.
7. Select a data box.
8. Close: Press the EXIT key. Press the PANE key.
Selecting a Data Box
Views
OR
Tap to Select
Selecting the Data Type
Select
40
Selecting the Data
Open