Humminbird ONIX Operating Manual page 25

Tools Bar
The Tools bar on the Home screen allows you to manage the control head operations. When you connect an accessory to the control
head, a related tool may also be displayed here.
Select Nav Data to manage your saved waypoints, routes, tracks, and groups. You can create new navigation
data from this screen, edit your saved navigation data, or start navigation (see Manage your Navigation
Data).
Required Equipment: GPS receiver (internal or external)
Select Targets to manage AIS and MARPA targets. See AIS and MARPA for more information.
Required Equipment: AIS or Radar, GPS receiver (internal or external), and compass/heading sensor
Select Internet to open the Browser and surf the Web. See Internet Tool for more information.
Required Equipment: external wireless antenna
This feature is only available on the ION control head.
Select Wireless to connect to wireless networks. This tool allows you to locate wireless networks in the
area and input the required password information. See Set up Wireless for more information.
Required Equipment: external wireless antenna
This feature is only available on the ION control head.
Select Trip Log to display Speed over Ground (SOG), timer for elapsed time, distance traveled since last
reset, average speed, and trip fuel. You can also reset the trip log to zero and review trend data from this
tool.
Required Equipment: GPS receiver (internal or external)
25 Home Screen