Humminbird ONIX Operating Manual page 12

Start the Trip Log
The Trip Log provides active navigation data, such as average Speed over Ground (SOG), timer for elapsed time, distance
traveled since last reset, and trip fuel.
1. Press the HOME key.
2. Select the Trip Log tool.
3. Select Trip > Trip Log.
4. Tap the on/off button, or press the ENTER key, to turn it on.
Change System Settings
Your control head was configured during the installation set up. To change the system settings such as the backlight, key sounds,
units of measurement, and the time and date format, select Settings from the Home screen. See Manage your Control Head for
more information.
1. Press the HOME key.
2. Select Settings.
3. Select General.
NOTE: To reconfigure the control head with the Setup Guide, select the Setup Guide tool from the Home screen.
Power Off
Many of the control head settings can be accessed quickly from the Power X-Press Menu. You can also turn off Radar
transmission and Wi-Fi, or change the transducer source from this menu.
Power Off
1. Tap the top, right corner of the status bar.
OR
Press the POWER key.
2. Select Power Off.
Cross Touch Option
Press and hold the POWER key.
Getting Started 12